Product Categories
Contact Us

Weimi Hardware Tech. Company


Address: 1F, Jiufa Technology Park, Jinfu West Road, Liaobu Town, Dongguan, China 523407


Tel: 86-769-81123370


Fax: 86-769-81123371


Phone: 86-15814312928


info@weimichina.com


sales@weimichina.com


sales02@weimichina.com

Home > News > Content
How To Improve The Success Rate Of Stamping Parts Production
Weimi Hardware Tech. Company | Updated: Aug 11, 2017

How to improve the success rate of Stamping Parts production
At present, many factories will be Stamping Parts production, Stamping Parts in the 5 gold industry in the field of recognition, and he also plays an important industrial role, but how to improve the success rate of production to prevent Stamping Parts damaged? Xiao Bian made the following summary.
First, improve the mechanical equipment. China is now a lot of companies have Stamping Parts, molds and equipment processing and research, so Stamping Parts production plant, you can use the improved machinery and equipment, the use of Stamping Parts. This can improve the service life of the equipment, while the production of Stamping Parts, specifications, the appearance of sophisticated.
Installation of protective mode, Stamping Parts manufacturers in the processing and production of Stamping Parts, we need to use the installation of a good protection mode, to avoid the production process due to the small amount of processing, processing skills are not refined and has made a good Stamping Parts , Causing damage to the impact of market sales affect its value play, so we need to install protective tools. He can in the production process, to protect the production of formality and accuracy, to prevent improper reasons due to improper product specifications are not standard.
Stamping Parts production plant, in the process of product processing and production more concerned about the production and maintenance of Stamping Parts, only to improve the maintenance and maintenance of the ability and skills in order to make the product life greatly extended, because the Stamping Parts are high precision Of the product, its specifications require relatively rigorous, so the daily maintenance and maintenance, in order to facilitate the role of machinery and equipment.
We need to check the mold before the installation of stamping die, or whether the accumulation of dust ditch. If the accumulation of dust need to be cleaned in time, because the Stamping Parts production plant that the accumulation of dust, may cause damage to the mold, long-term use will wear off the smoothness of its surface, affecting the accuracy of the mold, so the installation of the inspection before use Very important.
Regular inspection of the punch and die is also an important part of maintenance. If you use the stamping process in the process found that his punch and die appeared serious wear and tear, or specifications, has been seriously out of tune, this time need to stop using in a timely manner. Because punch punch will seriously wear the machine itself, will cause damage to the machine inside. So for the manufacturer, the maintenance and maintenance of the intensity and the machine life is closely related.
 Stamping Parts manufacturers to pay more attention to the production of precision Stamping Parts of the standard specifications, because if the production of mold specifications inaccurate, the standard is not perfect, will affect the effectiveness of the use of buyers, then for this product, The process, with the characteristics we should understand.
Stamping Parts production plant in the production of products will use less material, Stamping Parts of the production and processing, because it consumes less material, so the weight of the parts lighter, so after the success of the production stamping. More attention to the strength of the material itself, only in the premise of the strength of the sheet to enhance the Stamping Parts continue to enhance the strength, so as to improve its service life, while ensuring product quality.
Stamping Parts through the stamping to achieve the final shape, the surface texture has not changed, so after the molding we will find the product surface texture is relatively clear, smooth surface light, to achieve a beautiful appearance of the shape, so manufacturers can also be the second The depth of processing, in the depth of processing, you can choose the surface treatment can choose to dip, galvanized and other means.

Feedback
Weimi Hardware Tech. Company
Copyright © Dongguan Weimi Hardware Technology Co.,Ltd All rights reserved.