Product Categories
Contact Us

Weimi Hardware Tech. Company


Address: 1F, Jiufa Technology Park, Jinfu West Road, Liaobu Town, Dongguan, China 523407


Tel: 86-769-81123370


Fax: 86-769-81123371


Phone: 86-15814312928


info@weimichina.com


sales@weimichina.com


sales02@weimichina.com

Home > News > Content
CNC Turning Parts For Processing Applications
Weimi Hardware Tech. Company | Updated: Oct 24, 2017

CNC Turning Parts for processing applications
CNC Turning Parts machining is the production technology of parts of a product with a certain shape, size and performance achieved by the fact that the sheet is directly subjected to deformation forces and deformed in the mold by means of the power of conventional or special stamping equipment. Sheet metal, mold and equipment are the three elements of stamping. Stamping processing is a metal cold deformation processing method. So it is called cold stamping or sheet stamping, referred to as stamping. It is one of the main methods of metal plastic processing (or pressure processing), but also under the material forming engineering technology.
CNC Turning Parts and castings, forgings, there are thin, uniform, light, strong characteristics. Stamping can be made out of the cooked hand diameter difficult to manufacture with reinforced ribs, ribs, coil or flanging of the workpiece to improve its rigidity. As a result of rejecting the rough mold workpiece precision up to micron level, and high precision, consistent specifications, to punch out the hole nest, convex and so on. In the actual production and stamping process commonly used in the process of testing, such as drawing performance test, bulging performance test materials such as stamping performance to ensure the finished product quality and high pass rate.
CNC Turning Parts The basic principle of processing is to use the design of the steel plate made of good mold, according to the design of a good press (tens of tons to 2000 tons) into the required shape. Simply say, CNC Turning Parts is the mold with the metal stamping into a specific shape. There are large and small CNC Turning Parts. Such as four door two cover, side Wai, front and rear fender, front and rear wheel cover, the front floor after the floor are large, dry day to death to live, which is basically a cover, wrapped in the car's exterior shell. Other inner panels, reinforced beams, beams and so on is to strengthen the role, there are small pieces of stamping, the basic are very small things. Rolling molding process is mainly by the plastic movement of materials rolling into a variety of complex shapes of the shaft, the valve core and special fasteners and other products. Rolling deformation is a line contact, continuous progressively, the required deformation force is small, a trip can produce one or several parts. Compared with the cutting and grinding process, it not only has high production efficiency, saves material, but also has high product strength and stable quality. This process is especially suitable for processing difficult and difficult to cut workpiece, especially for annual production Million pieces of large quantities of products, the use of rolling molding process the most favorable, the most economical benefits.
CNC Turning Parts, CNC Turning Parts, CNC Turning Parts, CNC Turning Parts, CNC Turning Parts, CNC Turning Parts, CNC Turning Parts, CNC Turning Parts, CNC Turning Parts, CNC Turning Parts, CNC Turning Parts, CNC Turning Parts, Way and scope of application are also different, automatic CNC Turning Parts are popular. Our CNC Turning Parts is a professional manufacturer of CNC Turning Parts for CNC Turning Parts. Please contact our CNC Turning Parts manufacturer. Our technical staff will provide you with services and explain CNC Turning Parts processing technology And CNC Turning Parts knowledge.
The main purpose of the hardness testing of the CNC Turning Parts is to determine whether the degree of annealing of the purchased sheet is suitable for the subsequent CNC Turning Parts to be processed. Different types of CNC Turning Parts machining processes require different hardness grades. The aluminum alloy plate for CNC Turning Parts can be tested with a Wechsler. Material thickness greater than 13mm can be used when the pasteurizer. Pure aluminum or low hardness aluminum alloy plate should be used Pasteurizer.
In the CNC Turning Parts industry, sometimes known as sheet metal forming, but slightly different. The so-called sheet metal molding refers to the use of sheet metal, thin-walled tube, thin profile as raw materials, plastic processing of the forming method collectively referred to as sheet metal forming, deformation of the plate at this time generally do not focus on consideration.

Feedback
Weimi Hardware Tech. Company
Copyright © Dongguan Weimi Hardware Technology Co.,Ltd All rights reserved.